| | | |
 |      | | | | | design of adjacent structures | | | | | design of adjacent structures | | |
| | | | | aa | 27,5 mm | | | da | 30 mm | tolerance:p2 | | da | 20,5 mm | | | r1 min | 0,6 mm | | rmin | 0,6 mm | |
| |
| m | 0,052 kg | | | ca | 13100 n | | basic rated dynamic load, axial direction |
| | c0a | 24700 n | | basic rated static load, axial |
| | ng fett | 6700 1/min | | limit speed of grease lubrication |
| | mrl | 0,024 nm | | bearing friction moment
limited to the use of a given force preload, minimum oil lubricated bearings. |
| | cal | 516 n/µm | | displacement stiffness
effective for o-or x-shaped matched bearings |
| | 2 µm | | axial beat
the axial runout of the screw support bearing configuration is based on the inner ring rotation. |
| | zm15, am15 | | recommended code for ina locking nut |
| | ma | 10 nm | | locking moment
applicable only to ina precision locking nut |
| | 5740 n | |
|
|
assembly
