| | | |
 |      | | | | | design of adjacent structures | | | | | design of adjacent structures | | |
| | | | | aa | 46,5 mm | | | da | 52 mm | tolerance:p2 | | da | 38 mm | | | r1 min | 1 mm | | rmin | 1 mm | |
| |
| m | 0,24 kg | | | ca | 29500 n | | basic rated dynamic load, axial direction |
| | c0a | 68000 n | | basic rated static load, axial |
| | ng fett | 4300 1/min | | limit speed of grease lubrication |
| | mrl | 0,1 nm | | bearing friction moment
limited to the use of a given force preload, minimum oil lubricated bearings. |
| | cal | 917 n/µm | | displacement stiffness
effective for o-or x-shaped matched bearings |
| | 2 µm | | axial beat
the axial runout of the screw support bearing configuration is based on the inner ring rotation. |
| | zm25, am25 | | recommended code for ina locking nut |
| | ma | 40 nm | | locking moment
applicable only to ina precision locking nut |
| | 14480 n | |
|
|
assembly
