| | | | | | 46 | | number of fixed holes in inner ring
be careful!
fixed holes in adjacent structures
pay attention to the pitch of bearing hole. |
| | 45 | | number of fixed holes in outer ring
be careful!
fixed holes in adjacent structures
pay attention to the pitch of bearing hole. |
| | 2 | | | 3 | | number of locking threads |
| | | | | | a | 6,2 mm | | fixed hole of inner ring belt | | | c | 15 mm | | | d1 | 274 | | | | d1 | 7 mm | | fixed hole of inner ring belt |
| | d2 | 11 mm | | fixed hole of inner ring belt |
| | d3 | 7 mm | | | g | m8 | | | h1 | 30 mm | | | h2 | 15 mm | | | j | 215 mm | | fixed hole of inner ring belt |
| | j1 | 285 mm | | | t | 48 x 7,5° | | pitch circlenumber x pitch circle角度
including fixed bolts and compression threads |
|
| | | m | 9,7 kg | | | ma | 14 nm | | bolt tightening torque
tightening torque for din 912, class 10.9 bolts. |
| | ca | 155000 n | | basic rated dynamic load, axial direction |
| | c0a | 840000 n | | basic rated static load, axial |
| | cr | 94000 n | | basic rated dynamic load, radial |
| | c0r | 226000 n | | basic rated static load, radial |
| | ng | 1160 1/min | | limit speed
for conditions with long running times or continuous operation, please contact us. |
| | cal | 4000 n/µm | | bearing axial stiffness
the stiffness of the rolling element assembly, the bearing ring and the bolted connection are taken into account. |
| | crl | 1200 n/µm | | radial stiffness of the bearing
consider rolling element assemblies, bearing rings and bolts |
|
|
|
|
