thrust angular contact ball bearingszklf2575-2z | |
| bidirectional, screw to install, seal on both sides of the gap |
| |  assembly | |
|
|
| |  |     |
 | | | | | | | design of adjacent structures | | |  |
|
|
| design of adjacent structures |
|
|
| | | | | 1) | | | | b | 3 mm | | | da max | 48 mm | | | d1d | 40,5 mm | | | d2 | 6,8 mm | | | da min | 32 mm | | | i | 19 mm | | | j | 58 mm | | | r1 min | 0,6 mm | | | rmin | 0,3 mm | | | t | 4 x 90° | | number of nodal circles x nodal circle angle |
|
| |
| m | 0,72 kg | | | ca | 27500 n | | basic rated dynamic load, axial direction |
| | c0a | 55000 n | | basic rated static load, axial |
| | ng fett | 4700 1/min | | limit speed of grease lubrication |
| | mrl | 0,2 nm | | | cal | 750 n/µm | | | ckl | 200 nm/mrad | | | mm | 0,486 kg x cm^2 | | weight moment of inertia of rotating inner ring |
| | 2 µm | | axial beat
the axial runout of the screw support bearing configuration is based on the inner ring rotation. |
| | 4 x m6 | | number x fixing screw size according to din 912-10.9
the tightening torque of the set screws must be in accordance with the manufacturer's data.
screws are not included in the scope of supply. |
| | zm25, am25 | | recommended code for ina locking nut |
| | | | the lock nut is not included in the scope of supply. |
| | ma | 25 nm | | tightening torque
only for ina precision lock nuts |
| | 9410 |
|
