thrust angular contact ball bearingszklf40100-2rs-2ap | |
| pairing, bidirectional, screw to install, on both sides of the lip seal |
| |  assembly | |
|
|
| |  |     |
 | | | | | | | design of adjacent structures | | |  |
|
|
| design of adjacent structures |
|
|
| | | | | 1) | | | | b | 3 mm | | | da max | 67 mm | | | d1d | 58 mm | | | d2 | 8,8 mm | | | da min | 50 mm | | | i | 59 mm | | | j | 80 mm | | | r1 min | 0,6 mm | | | rmin | 0,3 mm | | | t | 8 x 45° | | number of nodal circles x nodal circle angle |
|
| |
| m | 2,92 kg | | | ca | 70000 n | | basic rated dynamic load, axial direction |
| | c0a | 202000 n | | basic rated static load, axial |
| | ng fett | 1800 1/min | | limit speed of grease lubrication |
| | mrl | 1,05 nm | | | cal | 1750 n/µm | | | ckl | 1200 nm/mrad | | | mm | 4,52 kg x cm^2 | | weight moment of inertia of rotating inner ring |
| | 2,5 µm | | axial beat
the axial runout of the screw support bearing configuration is based on the inner ring rotation. |
| | 7 x m8x80 | | number x fixing screw size according to din 912-10.9
the tightening torque of the set screws must be in accordance with the manufacturer's data.
screws are not included in the scope of supply. |
| | zma40/62, am40 | | recommended code for ina locking nut |
| | | | the lock nut is not included in the scope of supply. |
| | ma | 55 nm | | tightening torque
only for ina precision lock nuts |
| |
|
|
