thrust angular contact ball bearingszklf100200-2z | |
| bidirectional, screw to install, seal on both sides of the gap |
| |  assembly |  |
|
|
| |  |     |
 | | | | | | | design of adjacent structures | | |  |
|
|
| design of adjacent structures |
|
|
| | | | | 1) | | | | b | 3 mm | | | da max | 150 mm | | | d1d | 132 mm | | | d2 | 11 mm | | | da min | 128 mm | | | i | 45 mm | | | j | 175 mm | | | r1 min | 0,6 mm | | | rmin | 0,6 mm | | | t | 8 x 45° | | number of nodal circles x nodal circle angle |
|
| |
| m | 9,3 kg | | | ca | 140000 n | | basic rated dynamic load, axial direction |
| | c0a | 435000 n | | basic rated static load, axial |
| | ng fett | 2150 1/min | | limit speed of grease lubrication |
| | mrl | 2,6 nm | | | cal | 1900 n/µm | | | ckl | 5800 nm/mrad | | | mm | 85,3 kg x cm^2 | | weight moment of inertia of rotating inner ring |
| | 3 µm | | axial beat
the axial runout of the screw support bearing configuration is based on the inner ring rotation. |
| | 8 x m10 | | number x fixing screw size according to din 912-10.9
the tightening torque of the set screws must be in accordance with the manufacturer's data.
screws are not included in the scope of supply. |
| | zma100/140, am100 | | recommended code for ina locking nut |
| | | | the lock nut is not included in the scope of supply. |
| | ma | 250 nm | | tightening torque
only for ina precision lock nuts |
| | 28760 | |
|
