| |  |     |
 | | | | | design of adjacent structures | | | | | | |
| | | | | da max | 53 mm | | | d1 | 45,5 mm | | | da min | 40 mm | | | r1 min | 0,6 mm | | | m| 0,39 kg | | | ca | 29000 n | | basic rated dynamic load, axial direction |
| | c0a | 64000 n | | basic rated static load, axial |
| | ng fett | 2200 1/min | | limit speed of grease lubrication |
| | mrl | 0,5 nm | | | cal | 850 n/µm | | | ckl | 300 nm/mrad | | | mm | 0,73 kg x cm^2 | | weight moment of inertia of rotating inner ring |
| | 5 µm | | axial beat
the axial runout of the screw support bearing configuration is based on the inner ring rotation. |
| | zm30, am30 | | recommended code for ina locking nut |
| | | | the lock nut is not included in the scope of supply. |
| | ma | 32 nm | | tightening torque
only for ina precision lock nuts |
| | 10451 n | | |
|
|
|
assembly
