needle/thrust cylindrical roller bearingzarf90210-l-tv | |
| bidirectional, installed with bolt, long axis location ring |
| | d | 90 mm | | | | 6) | | | | seal rack: see "components" below. |
| | b | 22,5 mm | | | b1 | 47,5 mm | | b2 | 16 mm | |
| c | 32 mm | | | c1 | 17,5 mm | | | d1 | 160 mm | | | d2 | 130 mm | | | d3 | 158 mm | | | da max | 161 mm | | installation size
if the rotary shaft seal is used, the outer diameter of seal ring must be considered. |
| | d1 | 8 mm | | | da min | 125 mm | | installation size
if the rotary shaft seal is used, the outer diameter of seal ring must be considered. |
| | h3 | 94,5 mm | | | j | 180 mm | | | r1 min | 1 mm | | | rmin | 0,3 mm | |
| | | m | 15,1 kg | | | ca | 325000 n | | basic rated dynamic load, axial direction |
| | c0a | 1030000 n | | basic rated static load, axial |
| | cr | 98000 n | | basic rated dynamic load, radial |
| | c0r | 210000 n | | basic rated static load, radial |
| | ng öl | 1800 1/min | | limit speed for oil lubrication (only when there is a suitable cooling system) |
| | ng fett | 700 1/min | | limit speed of grease lubrication |
| | mrl | 10,5 nm | | | cal | |
|
| 
assembly
