| | | | | da zt | 1196 mm | 1196 | | suitable for bearing with centering sleeve (suffix zt)
length of centering sleeve (see part drawing)
tolerance:-it8 |
| | di | 1095,5 mm | | da| 1092,5 mm | | | di zt | 986 mm | | suitable for bearing with centering sleeve (suffix zt)
length of centering sleeve（t，t）
tolerance:+it8
| | h | 56 mm | | | lal | 1170 mm | | | li | 1012 mm | | | na | 16 | | number of fixed holes in outer ring |
| | ni | 20 | | number of fixed holes in inner ring |
|
|
| m | 62,5 kg | | | fr per | 124800 n | | overcoming friction maximum permissible radial load |
| | ca | 244000 n | | basic rated dynamic load, axial direction |
| | c0a | 770000 n | | basic rated static load, axial |
| | cr | 160000 n | | basic rated dynamic load, radial |
| | c0r | 290000 n | | basic rated static load, radial |
| | | | four conical lubricating nozzles, according to din 71412-a s8x1, uniform circumferential interval |
| | | | bearings with no holes in the inner and outer rings are also suitable. |
|
|
