| |  |     |
 | | | | | design of adjacent structures | | | | | | |
| | | | | a | 35 mm | | | b1 | 8 mm | | | d1 | 50 mm | | | d1 | 21 mm | | | | | d2 | 5,5 mm | | | da max | 27 | | | | da min | 14 mm | | | j | 40 mm | | | m | 34,5 mm | | | n | 20 mm | | | r1 min | 0,6 mm | | | rmin | 0,3 mm | |
| | | m | 0,18 kg | | | ca | 13400 n | | basic rated dynamic load, axial direction |
| | c0a | 18800 n | | basic rated static load, axial |
| | ng fett | 8600 1/min | | limit speed of grease lubrication |
| | mrl | 0,06 nm | | | cal | 325 n/µm | | | ckl | 25 nm/mrad | | | mm | 0,029 kg x cm^2 | | weight moment of inertia of rotating inner ring |
| | 2 µm | | axial beat
the axial runout of the screw support bearing configuration is based on the inner ring rotation. |
| | 4 x m5 | | number x fixing screw size according to din 912-10.9
the tightening torque of the set screws must be in accordance with the manufacturer's data.
screws are not included in the scope of supply. |
| | zm10 | | recommended code for ina locking nut |
| | | | the lock nut is not included in the scope of supply. |
| | ma | 6 nm | | tightening torque
only for ina precision lock nuts |
|
|
|
|
assembly
