| | | d | 90 mm | | bearing seat aperture tolerance: h7 (arithmetic average)
tolerance: +0,035 / 0 |
| | d2 | 185 mm | | l4 | 296 mm | |
| |
| 0,055 - 0,142 mm | | radial internal clearance |
| | b | 90 mm | | | c1 | 72 mm | | | c2 | 52 mm | | | d | 130 mm | | | | | d1 | 99 mm | | | d3 | m72x3 | | | | d4 | 100 mm | | | d5 | 160 mm | | | d6 | m16x50 | | hole seat top cover bolt according to din 912-10.9 |
| | dk | 115 mm | | | fz | 400000 n | | nominal cylindrical force |
| | h1 | 195 mm | | | l3 | 91 mm | | | l7 | 85 mm | | | r1s min | 1 mm | | | α | 4 ° | |
| | | | | thread runout or groove provided by manufacturer |
| | | | not included in the din 24 338 standard |
| | m | 17 kg | | | cr | 490000 n | | basic rated dynamic load, radial |
| | c0r | 660000 n | | basic rated static load, radial
bearing block basic rated load |
| | ma | 400 nm | | | 500 | | nominal cylindrical force |
|
|
|
|
