|  |     | | | | arrangement of holes
| |
| | | the reaming bolt of l-ring is facing the bearing hole.
bearing inner diameter is not supported in area (2). | the reaming bolt of l-ring is facing the bearing hole.
| |
| | | d | 100 mm | | | | 15 | | number of fixed holes in inner ring
be careful!
for the fixed holes of adjacent structures, the pitch circle of bearing holes must be considered. | be careful!
| 18 | | number of fixed holes in outer ring
be careful!
for the fixed holes of adjacent structures, the pitch circle of bearing holes must be considered. |
| | a | 5,7 mm | | fixed hole of inner ring belt |
| | c | 12 mm | | | d1 maxd | 161 mm | | | d1 | 5,6 mm | | fixed hole of inner ring belt |
fixed hole of inner ring belt | | d2 | 10 mm | | fixed hole of inner ring belt |
| | d3 | 5,6 mm | | | g | m5 | | removal holes with threads
number： 3 |
| | h1 | 25 mm | | | j | 112 mm | | fixed hole of inner ring belt |
| | j1 | 170 mm | | | t | 18 x 20° | | pitch circle t
number x t
including removal holes with retaining bolts or threads. |
|
| | | m | 4 kg | | | ca | 76500 n | | basic rated dynamic load, axial direction |
| | c0a | 415000 n | | basic rated static load, axial |
| | cr | 47500 n | | basic rated dynamic load, radial |
| | c0r | 120000 n | | basic rated static load, radial |
| | ng | 430 1/min | | limit speed of grease lubrication
for conditions with long running times or continuous operation, please contact us. |
| | mrl | 4 nm | | | ma | 8,5 nm | | bolt tightening torque
bolt tightening torque according to din 912, class 10.9. |
| | cal | 1,2 kn/µm | | | crl | 2 kn/µm | | radial stiffness of the bearing |
| | ckl | 5 knm/mrad | | bearing tipping stiffness |
| | |
|
|
|
|
|
