| | | di | 180 mm | | | Tolerance:K6
+0,004 / -0,021 |
| | Da | 225 mm | | | H | 22 mm | | | Bearing section height
Tolerance: +/-0,13 |
|
| | | | Di | 202,8 mm | | | DM | 202 mm | | | da | 201,2 mm | | | h | 22 mm | | | Height of a single ferrule
Tolerance:E8
-0,025 |
| | rmin | 1,1 mm | | | S | 2 mm | | | Lubrication hole: 3 holes equidistantly distributed on the circumference |
|
| | | | m | 2,3 kg | | | | 0,015 mm | | | Running accuracy, Path item |
| | | 0,010 mm | | | Running accuracy, Axis term |
| | sr min | 0,005 mm | | | sr max | 0,025 mm | | | Maximum diameter clearance |
| | sk min | 0,010 mm | | | Minimum axis term clearance |
| | sk max | 0,05 mm | | | Maximum axis term clearance |
| | RLOmax | 0,005 mm | | | Small clearance: diameter clearance |
| | RLOmax | 0,010 mm | | | VSPmin | 0,005 mm | | | VSPmax | 0,025 mm | | | Ca | 96000 N | | | Basic dynamic load rating,Axis term |
| | C0a | 380000 N | | | Basic static load rating,Axis term |
| | Cr | 69000 N | | | Basic dynamic load rating,Path item
(only for pure diameter item loads) |
| | C0r | 153000 N | | | Basic static load rating,Path item
(only for pure diameter item loads) |
| | nG Öl | 755 1/min | | | Limit speed for oil lubrication under conventional clearance |
| | nG Fett | 375 1/min | | | Limit speed during grease lubrication |
| | nG Öl | 375 1/min | | | Limit speed with Preload oil lubrication |
| | nG Fett | 185 1/min | | | PreloadLimit speed during grease lubrication |
| | | 61836 | | | Size consistent with ISO size series 18 |
|
|
|
