| | | di | 300 mm | | | Tolerance:K6
+0,005 / -0,027 |
| | Da | 380 mm | | | H | 38 mm | | | Bearing section height
Tolerance: +/-0,14 |
|
| | | | Di | 340,8 mm | | | DM | 340 mm | | | da | 339,2 mm | | | h | 38 mm | | | Height of a single ferrule
Tolerance:E8
-0,05 |
| | rmin | 2,1 mm | | | S | 2,5 mm | | | Lubrication hole: 3 holes equidistantly distributed on the circumference |
|
| | | | m | 12 kg | | | | 0,020 mm | | | Running accuracy, Path item |
| | | 0,010 mm | | | Running accuracy, Axis term |
| | sr min | 0,010 mm | | | sr max | 0,040 mm | | | Maximum diameter clearance |
| | sk min | 0,020 mm | | | Minimum axis term clearance |
| | sk max | 0,08 mm | | | Maximum axis term clearance |
| | RLOmax | 0,005 mm | | | Small clearance: diameter clearance |
| | RLOmax | 0,010 mm | | | VSPmin | 0,005 mm | | | VSPmax | 0,025 mm | | | Ca | 243000 N | | | Basic dynamic load rating,Axis term |
| | C0a | 1070000 N | | | Basic static load rating,Axis term |
| | Cr | 173000 N | | | Basic dynamic load rating,Path item
(only for pure diameter item loads) |
| | C0r | 425000 N | | | Basic static load rating,Path item
(only for pure diameter item loads) |
| | nG Öl | 450 1/min | | | Limit speed for oil lubrication under conventional clearance |
| | nG Fett | 225 1/min | | | Limit speed during grease lubrication |
| | nG Öl | 225 1/min | | | Limit speed with Preload oil lubrication |
| | nG Fett | 110 1/min | | | PreloadLimit speed during grease lubrication |
| | | 61860 | | | Size consistent with ISO size series 18 |
|
|
|
