| | | di | 400 mm | | | Tolerance:K6
+0,007 / -0,029 |
| | Da | 500 mm | | | H | 46 mm | | | Bearing section height
Tolerance: +/-0,15 |
|
| | | | Di | 451 mm | | | DM | 450 mm | | | da | 449 mm | | | h | 46 mm | | | Height of a single ferrule
Tolerance:E8
-0,05 |
| | rmin | 2,1 mm | | | S | 2,5 mm | | | Lubrication hole: 3 holes equidistantly distributed on the circumference |
|
| | | | m | 24 kg | | | | 0,030 mm | | | Running accuracy, Path item |
| | | 0,010 mm | | | Running accuracy, Axis term |
| | sr min | 0,010 mm | | | sr max | 0,050 mm | | | Maximum diameter clearance |
| | sk min | 0,020 mm | | | Minimum axis term clearance |
| | sk max | 0,10 mm | | | Maximum axis term clearance |
| | RLOmax | 0,005 mm | | | Small clearance: diameter clearance |
| | RLOmax | 0,010 mm | | | VSPmin | 0,005 mm | | | VSPmax | 0,025 mm | | | Ca | 385000 N | | | Basic dynamic load rating,Axis term |
| | C0a | 1800000 N | | | Basic static load rating,Axis term |
| | Cr | 275000 N | | | Basic dynamic load rating,Path item
(only for pure diameter item loads) |
| | C0r | 720000 N | | | Basic static load rating,Path item
(only for pure diameter item loads) |
| | nG Öl | 340 1/min | | | Limit speed for oil lubrication under conventional clearance |
| | nG Fett | 170 1/min | | | Limit speed during grease lubrication |
| | nG Öl | 170 1/min | | | Limit speed with Preload oil lubrication |
| | nG Fett | 85 1/min | | | PreloadLimit speed during grease lubrication |
| | | 61880 | | | Size consistent with ISO size series 18 |
|
|
|
