| | | di | 500 mm | | | Tolerance:K6
+0,008 / -0,032 |
| | Da | 620 mm | | | H | 56 mm | | | Bearing section height
Tolerance: +/-0,16 |
|
| | | | Di | 561,2 mm | | | DM | 560 mm | | | da | 558,8 mm | | | h | 56 mm | | | Height of a single ferrule
Tolerance:E8
-0,05 |
| | rmin | 3 mm | | | S | 2,5 mm | | | Lubrication hole: 3 holes equidistantly distributed on the circumference |
|
| | | | m | 44 kg | | | | 0,040 mm | | | Running accuracy, Path item |
| | | 0,010 mm | | | Running accuracy, Axis term |
| | sr min | 0,015 mm | | | sr max | 0,060 mm | | | Maximum diameter clearance |
| | sk min | 0,030 mm | | | Minimum axis term clearance |
| | sk max | 0,12 mm | | | Maximum axis term clearance |
| | RLOmax | 0,006 mm | | | Small clearance: diameter clearance |
| | RLOmax | 0,012 mm | | | VSPmin | 0,005 mm | | | VSPmax | 0,030 mm | | | Ca | 560000 N | | | Basic dynamic load rating,Axis term |
| | C0a | 2750000 N | | | Basic static load rating,Axis term |
| | Cr | 395000 N | | | Basic dynamic load rating,Path item
(only for pure diameter item loads) |
| | C0r | 1100000 N | | | Basic static load rating,Path item
(only for pure diameter item loads) |
| | nG Öl | 275 1/min | | | Limit speed for oil lubrication under conventional clearance |
| | nG Fett | 135 1/min | | | Limit speed during grease lubrication |
| | nG Öl | 135 1/min | | | Limit speed with Preload oil lubrication |
| | nG Fett | 65 1/min | | | PreloadLimit speed during grease lubrication |
| | | 618/500 | | | Size consistent with ISO size series 18 |
|
|
|
