| | | d | 12 mm | | | D | 55 mm | | | The outer ring of the bearing is blue plated. |
| | B | 20 mm | |
| | | | 1) | | | | B1 | 5 mm | | | Da min | 35 mm | | | d1 | 5,3 mm | | | d2 | 34 mm | | | d3 | 4,3 mm | | | da max | 19 mm | | | H | 35 mm | | | H1 | 10 mm | | | H2 | 15 mm | | | J | 45 mm | | | m | M12x1 | | | t | 24 mm | | | W | 3 mm | | | Flat head screws according to DIN 913 |
|
| | | | m | 160 g | | | | M5 | | | Fixing bolt according to DIN 912
The tightening torque of the set screws must be in accordance with the manufacturer's data.
Bolts according to DIN 912 are not included in the scope of supply. |
| | Ca | 9600 N | | | Basic dynamic load rating,Axis term |
| | C0a | 24500 N | | | Basic static load rating,Axis term
P 0 per = 0,5 x C 0a |
| | nG Fett | 1200 1/min | | | MRL | 6 Ncm | | | Bearing Friction torque
Note: When calculating the size, you must consider the starting Friction torque of 2 ~ 3 x M RL. The data in the table is the reference value when the test speed is nearly 5 1/min. |
| | | 0,05 mm | | | Axis jump accuracy
Note: When calculating the size, you must consider the starting Friction torque of 2 ~ 3 x M RL. The data in the table is the reference value when the test speed is nearly 5 1/min. |
| | caL | 550 N/µm | | | Mm | 0,1221 kg x cm^2 | | | Weight moment of inertia of rotating inner ring and combination nut |
| | Mm | 5 Nm | | | Flat head screws according to DIN 913 |
| | | KGT16X5 | | | Ball bolts according to DIN 69 051 |
| |
|
|
