|  |       | | | | | Adjacent structural design | | | | | Adjacent structural design | | | |
| | | | | | A | 35 mm | | | B1 | 8 mm | | | D1 | 50 mm | | | d1 | 19 mm | | | d2 | 5,5 mm | | | da max | 25 mm | | | da min | 11 mm | | | J | 40 mm | | | m | 34,5 mm | | | n | 20 mm | | | r1 min | 0,6 mm | | | rmin | 0,3 mm | |
| | | | m | 0,17 kg | | | Ca | 12500 N | | | Basic dynamic load rating,Axis term |
| | C0a | 16300 N | | | Basic static load rating,Axis term |
| | nG Fett | 9500 1/min | | | Limit speed during grease lubrication |
| | MRL | 0,04 Nm | | | caL | 250 N/µm | | | ckL | 20 Nm/mrad | | | Mm | 0,02 kg x cm^2 | | | Weight moment of inertia of rotating inner ring |
| | | 2 µm | | | Axis jump
The Axis jump of the screw-supported bearing configuration is based on the inner ring rotation. |
| | | 4 x M5 | | | Quantity x size of fixing screws according to DIN 912-10.9
The tightening torque of the set screws must be in accordance with the manufacturer's data.
Screws are not included in the scope of supply. |
| | | ZM08 | | | Recommended INA lock nut code |
| | | | | | The lock nut is not included in the scope of supply. |
| | MA | 4 Nm | | | Tightening torque
Only for INA precision lock nuts |
|
|
|
Component
