|  | | |      | | | | | Adjacent structural design | | | | | Adjacent structural design | | | |
| | | | | | a | 24 mm | | | Da | 27 mm | | | da | 17 mm | | | r1 min | 0,6 mm | | | rmin | 0,6 mm | |
| | | | m | 0,042 kg | | | Ca | 12200 N | | | Basic dynamic load rating,Axis term |
| | C0a | 20700 N | | | Basic static load rating,Axis term |
| | nG Fett | 8000 1/min | | | Limit speed during grease lubrication |
| | MRL | 0,018 Nm | | | Bearing Friction torque
Limited to bearings with a given amount of preload, minimum oil lubrication. |
| | caL | 476 N/µm | | | Axis stiffness
Effective for matched bearings in O- or X-type arrangements |
| | | 2 µm | | | Axis jump
The Axis jump of the screw-supported bearing configuration is based on the inner ring rotation. |
| | | ZM12, AM12 | | | Recommended INA lock nut code |
| | MA | 8 Nm | | | 锁紧力矩
Only for INA precision lock nuts |
| | | 6111 N | |
|
|
Component
