|  | | |      | | | | | Adjacent structural design | | | | | Adjacent structural design | | | |
| | | | | | a | 41 mm | | | Da | 45 mm | | | da | 32 mm | | | r1 min | 1 mm | | | rmin | 1 mm | |
| | | | m | 0,15 kg | | | Ca | 23200 N | | | Basic dynamic load rating,Axis term |
| | C0a | 50000 N | | | Basic static load rating,Axis term |
| | nG Fett | 3800 1/min | | | Limit speed during grease lubrication |
| | MRL | 0,08 Nm | | | Bearing Friction torque
Limited to bearings with a given amount of preload, minimum oil lubrication. |
| | caL | 772 N/µm | | | Axis stiffness
Effective for matched bearings in O- or X-type arrangements |
| | | 2 µm | | | Axis jump
The Axis jump of the screw-supported bearing configuration is based on the inner ring rotation. |
| | | ZM25, AM25 | | | Recommended INA lock nut code |
| | MA | 25 Nm | | | 锁紧力矩
Only for INA precision lock nuts |
| | | 9430 N | |
|
|
Component
