|  |       | | | | | | | Adjacent structural design | | | | | Adjacent structural design | | | |
| | | | | | 1) | | | | b | 3 mm | | | Da max | 48 mm | | | d1 | 40,5 mm | | | d2 | 6,8 mm | | | da min | 32 mm | | | I | 19 mm | | | J | 58 mm | | | r1 min | 0,6 mm | | | rmin | 0,3 mm | | | t | 4 X 90° | | | Number of festivals X Festival angle |
|
| | | | m | 0,72 kg | | | Ca | 27500 N | | | Basic dynamic load rating,Axis term |
| | C0a | 55000 N | | | Basic static load rating,Axis term |
| | nG Fett | 2600 1/min | | | Limit speed during grease lubrication |
| | MRL | 0,4 Nm | | | caL | 750 N/µm | | | ckL | 200 Nm/mrad | | | Mm | 0,486 kg x cm^2 | | | Weight moment of inertia of rotating inner ring |
| | | 5 µm | | | Axis jump
The Axis jump of the screw-supported bearing configuration is based on the inner ring rotation. |
| | | 4 x M6 | | | Quantity x size of fixing screws according to DIN 912-10.9
The tightening torque of the set screws must be in accordance with the manufacturer's data.
Screws are not included in the scope of supply. |
| | | ZM25, AM25 | | | Recommended INA lock nut code |
| | | | | | The lock nut is not included in the scope of supply. |
| | MA | 25 Nm | | | Tightening torque
Only for INA precision lock nuts |
| | | |
|
|
Component
