|  |       | | | | | | | Adjacent structural design | | | | | Adjacent structural design | | | |
| | | | | | 1) | | | | b | 3 mm | | | Da max | 82 mm | | | d1 | 72 mm | | | d2 | 8,8 mm | | | da min | 63 mm | | | I | 25 mm | | | J | 94 mm | | | r1 min | 0,6 mm | | | rmin | 0,3 mm | | | t | 6 X 60° | | | Number of festivals X Festival angle |
|
| | | | m | 1,86 kg | | | Ca | 46500 N | | | Basic dynamic load rating,Axis term |
| | C0a | 126000 N | | | Basic static load rating,Axis term |
| | nG Fett | 1500 1/min | | | Limit speed during grease lubrication |
| | MRL | 0,9 Nm | | | caL | 1250 N/µm | | | ckL | 1000 Nm/mrad | | | Mm | 5,24 kg x cm^2 | | | Weight moment of inertia of rotating inner ring |
| | | 5 µm | | | Axis jump
The Axis jump of the screw-supported bearing configuration is based on the inner ring rotation. |
| | | 6 x M8 | | | Quantity x size of fixing screws according to DIN 912-10.9
The tightening torque of the set screws must be in accordance with the manufacturer's data.
Screws are not included in the scope of supply. |
| | | ZM50, AM50 | | | Recommended INA lock nut code |
| | | | | | The lock nut is not included in the scope of supply. |
| | MA | 85 Nm | | | Tightening torque
Only for INA precision lock nuts |
| | |
|
|
Component
