| | | d | 20 mm | | | D | 55 mm | | | Before the split, the dimension D is to be consistent with the tolerance class PN according to DIN 620-2 |
| | U | 31,5 mm | |
| | | | A | 16 mm | | | B1 | 31 mm | | | b | 1,35 mm | | | Tolerance: +0,3
Ring groove tolerance according to DIN 616
(for circlips according to DIN 5417) |
| | C1 | 11,2 mm | | | Tolerance:+0,2
Ring groove tolerance according to DIN 616
(for circlips according to DIN 5417) |
| | D1 | 52,6 mm | | | Tolerance:-0,5
Ring groove tolerance according to DIN 616
(for circlips according to DIN 5417) |
| | d3 max | 33 mm | | | S1 | 23,5 mm | |
| | | | m | 0,24 kg | | | Cr | 12800 N | | | Basic dynamic load rating,Path item |
| | C0r | 6600 N | | | Basic static load rating,Path item |
| | | RAE20-NPP-B | | | | 6204 | | | The associated bearing determines the equivalent load. |
|
|
|
Component
